Zhangjiagang Aofeiling Machinery Co., Ltd. fully automatic carbonated beverage filling machine aerated beverage production line equipment adopts domestic advanced production technology and technology, considering the performance and stability of the equipment from the aspects of low energy consumption and high output value.
Scan the QR code to follow Zhangjiagang Aofeiling Machinery Co., Ltd.
After the bottle enters the host machine, it enters the bottle washing machine through the transmission star wheel. The bottle clamp clamps the bottle mouth and turns up 180 ° along the bottle washing guide rail to make the bottle mouth downward. 24根管路分配至冲瓶夹），冲瓶夹喷嘴喷出无菌水，对瓶子内壁进行冲洗。 In the specific area of the bottle washer (determined by the water tray-the bottle water is pumped into the water tray by the water bottle pump, and then distributed by the water tray to the bottle holder through 24 pipes), the nozzle of the bottle holder is sprayed Rinse the inner wall of the bottle with sterile water. After the bottle is rinsed and drained, it is turned down along the guide rail and then turned 180 ° under the grip of the bottle clamp to make the bottle mouth upward. The washed bottles are exported from the bottle washer through the transition steel dial (pure water rinse bottle) and transferred to the next process-filling.
特点： Features of automatic carbonated beverage filling machine aerated beverage production line equipment :
DGZ18-18-6 glass bottle pure water washing, filling and capping machine has absorbed advanced technology of the same type of foreign products, with stable performance, safety and reliability.
的灌装 Filling of carbonated beverage production line equipment
Bottles are lifted by cylinders during filling, which makes the high-speed operation stable and reliable. Compressed air is connected to the lifting cylinder through the air intake distributor. When working, the compressed air is injected into the cavity of the cylinder A through the air injection pipe, so that the cylinder rises upward. After the bottle mouth rises, the filling valve is opened to start filling. When the filling set level is reached, the return valve of the filling valve is blocked by the material and the filling is completed. Then the cylinder descends under the action of pulling down the cam. At this time, the gas in the B cavity is discharged through the exhaust screw.
的封口 Sealing of automatic carbonated beverage filling machine gas beverage production line equipment
After the filling is completed, the bottle enters the capping machine through the transmission star wheel. The stopper on the capping machine jams the bottleneck, and works together with the bottleneck guard of the capping machine to keep the bottle upright and prevent rotation. The capping head revolves and rotates under the driving of the main shaft of the capping machine. Under the action of the cam, the capping, capping, capping and removing operations are completed, and the entire capping process is completed.
The capping head adopts a magnetic constant torque device. When the capping head takes the cap through the capping disc, the cap covers the cap and straightens the cap to ensure the correct position of the cap in the capping mold and the capping quality. After the capping is completed, the capping head overcomes the magnetic force and will not damage the bottle cap. At the same time, the capping lever pushes the cap out of the capping mold when the capping head is raised.
The capping disc transmits power through the pin wheel and the capping head to ensure that its movement is synchronized with the capping machine. The bottle cap enters the capping disc through the capping channel, and then the cap transfer star wheel transfers the cap to the capping head separately. Cover.
的理盖 Capping of carbonated beverage production line equipment of full automatic carbonated beverage filling machine
The lid is conveyed to the lid sorter through the lid capper. After the lid is sorted, the lid enters the capping channel through the reverse lid recovery device with the opening upward. When there is a lid opening downward, the lid will enter the capping tube through the reverse lid recovery device and return The lid unscrambler can ensure that the lid from the lid unscrambler enters the lid sterilizing machine through the cover channel at the correct position to sterilize the inside of the lid. There is a photoelectric detection switch on the cover channel between the cover sterilizer and the cover sterilizer and the cover sterilizer and the host. The start and stop of the cover aligner is controlled by the accumulation of the lid on the cover channel.
Zhangjiagang Aofeiling Machinery Co., Ltd. after-sales service commitment
1. After the equipment arrives at the user's workshop, the user should make the equipment in place according to the floor plan provided;
2. The company will send experienced technicians to guide the installation, commissioning and trial production of the equipment; our company will adjust the equipment to the design capacity within the planned time;
3. During commissioning, the company is responsible for providing corresponding spare parts and accessories for free.
1. The Division is responsible for providing technical training to the buyer for free. Training content includes equipment structure and maintenance, equipment control and operation, etc .;
2. The training can be carried out at the buyer's site. The Division will appoint qualified technical personnel to guide and develop corresponding training outlines;
3. Through training, the buyer's technicians should be able to master the relevant operation and maintenance skills, adjust the process more skillfully, and deal with various faults in a timely manner.
1. The company guarantees that the goods provided are brand new, unused, manufactured with new designs and suitable materials, and meet the quality, specifications and performance stipulated in the technical contract in all aspects;
2. The company guarantees that the production line will be put into operation within 3 days of the entire system after its correct installation and commissioning.
Make the equipment meet the technical performance indicators of the product;
3. The company guarantees that the design, process, manufacturing,
Installation, commissioning or material defects and all defects, failures and damages to the production line caused by the seller's responsibility;
4. The equipment quality guarantee period is 24 months after the acceptance of the production line. If during the quality guarantee period, the quality or specifications of the equipment is found to be inconsistent with the contract, or the equipment is found to be defective (including potential defects or the use of unqualified materials, etc.), the buyer has the right to work in File a claim with the seller during the warranty period;
5. The company guarantees the mechanical performance of the equipment provided, the quality of the product and the consumption index of the product.
1. After the equipment is accepted, it provides a 24-month warranty and the control system provides a 12-month warranty. During the warranty period, our company will provide users with spare parts and timely and effective services for free;
2. If the equipment fails, it needs to be repaired on-site. Our company guarantees that the maintenance staff will rush to the customer's site within 48 hours to help customers troubleshoot in time (except force majeure);
3. After the warranty period, our company will provide customers with a wide range of preferential and sufficient after-sales service such as spare parts supply for life;
4. Our company provides users with comprehensive home services once or twice a year for free, and the time can be determined according to customer needs.
Domestic service outlets: Beijing, Xinjiang, Changchun, Jiangsu, Sichuan
Zhangjiagang Aofeiling Machinery Co., Ltd.
: Www.all-filling. . com
Address: Science and Technology Pioneer Park, Jinfeng Town, Zhangjiagang City, Jiangsu Province